USAGE INSTRUCTIONS:

 

• Clean or replace bearings. Before applying Thermo-Gel^TM TG40750, thoroughly clean the bearings to remove traces of conventional greases, to avoid any incompatibility problems. Even new bearings should be cleaned of any slush or oils, and the cleaning solvents allowed to completely evaporate before applying Thermo-Gel^TM TG40750.
• Do not overfill bearing. Pack rolling elements as with conventional greases, fill only to about 30% full. Overfilling can cause failure due to over-heating and wear.
• Allow machinery to run to operating temperature. Thermo-Gel^TM TG40750 will remain a clean translucent yellow to 250ºF (121ºC), above this temperature it changes to a light brown color and develops a resilient consistency ensuring it would not melt, drip or run out, under conditions of high temperature, high shear or high load.
• To top up, simply add. Because Thermo-Gel^TM TG40750 delivers extended service life (on average 10 times longer than conventional lubricants), adjust lubrication schedule to benefit from this important product feature.
• Use recommended NLGI viscosity grade. NLGI viscosity grade numbers 1 and 2 are standard; other viscosity grades are available on special order. Consult Kem-A-Trix^TM or distributor.

TYPICAL CHARACTERISTICS

Drop point ASTM D-2265	None	Odor	None
Timken OK Load ATM D-2059 lb., min.	55+	Thickener	Synthetic
Rust Test	Pass	Fillers	Synthetic
Base oil viscosity Cst. at 40ºC Cst. at 100ºC	>500 >56	Silicone	None
Leakage, g	0.4	Color	Medium yellow
Usage temperature	-40ºF to 750ºF -40ºC to 399ºC	Shelf life (sealed, light-proof container)	> 10 years

 

"Economy Through Superior Quality"

Notice: All statements and specifications in this brochure are based on analytical tests and service experience. Because of the variety of applications and equipment used along with the unpredictability of equipment conditions and human factor involved in the use of this product, Kem-A-Trix^TM (Lubricants) Inc. makes no warranties expressed or implied that the product or products described are guaranteed for any length of time, any measure of service or for any specific purpose. The buyer should ascertain proper suitability, preparation and technique of use for the buyer's application or applications. Kem-A-Trix's only warranty is that its products conform with written specifications and are free from defects under normal usage. Kem-A-Trix^TM disclaims warranties of merchantability or fitness for any particular use or purpose.