USAGE INSTRUCTIONS:

 

• Clean or replace bearings. Before applying SBG^TM Sealed Bearing Gel lubricant, thoroughly clean the bearings to remove traces of conventional greases, to avoid any compatibility problems. Even new bearings should be cleaned of any slush or oils, and the cleaning solvents be allowed to completely evaporate before applying SBG^TM Sealed Bearing Gel.
• Do not overfill bearing. Pack rolling elements as with conventional greases but fill only to about one-third full. Over-packing will result in excessive bearing temperature.
• Allow machinery to run to operating temperature.
• To top up, simply add. For ultra-high speed bearings, do not re-lubricate with a grease gun; re-inspect and repack as required. Consult distributor and the suggested re-lubrication schedule.
• Use recommended NLGI viscosity grade. NLGI viscosity grade numbers 00,0,1, 2 and 3 are standard; other viscosity grades are available on special orders. For use through automated lubrication systems, use NLGI No.1or lower. Consult Kem-A-Trix^TM or distributor.

Suggested Motor Bearing Re-lubrication Schedule Using SBG^TM:

		¼ to 7½ HP	10 to 40 HP	50 HP
Easy service - infrequent service, door openers, floor sanders (1 hour/day)	Up to	10 years	7 years	4 years
Standard service - machine tools, compressors, conveyors, machinery used in air conditioning, laundry, textile and woodworking, water pumps, etc.	Up to	7 years	4 years	1½ years
Severe service - subject to high speed, high temperature, dirt, dust and severe vibration; e.g. service in mining and steel mill applications.	Up to	4 years	½ years	9 months
Very severe service - subject to constant & very high temperatures, very high speed, severe dirt, dust, moisture and vibration.	Up to	1 year	6 months	6 months

 

"Economy Through Superior Quality"

Notice: All statements and specifications in this brochure are based on analytical tests and service experience. Because of the variety of applications and equipment used along with the unpredictability of equipment conditions and human factor involved in the use of this product, Kem-A-Trix^TM (Lubricants) Inc. makes no warranties expressed or implied that the product or products described are guaranteed for any length of time, any measure of service or for any specific purpose. The buyer should ascertain proper suitability, preparation and technique of use for the buyer's application or applications. Kem-A-Trix's only warranty is that its products conform with written specifications and are free from defects under normal usage. Kem-A-Trix^TM disclaims warranties of merchantability or fitness for any particular use or purpose.